'893' refers to the 8" woofers and the sensitivity of 93db (2.83V/1m).
The 893 is a little harder to assemble than the other kits because it's a 3 way speaker with more crossover parts. This DIY kit includes a CNC cut front speaker baffle so the woofers and waveguide are recessed to the correct depth. You can build your own enclosure using the photo of the cut sheet (coming soon).
I put the half inch roundovers on the edges of the baffle myself. If you do not want roundovers because you are going to veneer the front panels, please select that option above.
Price Break Down: 2- 8" Eminence custom woofers: $133.122- 4" Celestion midrange woofers: $37.281- Denovo DNA-205: $32
1- SEOS-8 waveguide: $171- Set of crossover parts: $64.071- CNC cut front baffle: $21
1- Set of Screws and gaskets: $1.50
Packaging Material: $5.00Paypal Fee: $10.39Retail Cost: $$321.36Discount Cost: $319 with free shipping
|Model||The Cohesive 893|
|Designer's Name||Ryan Bouma|
|Woofer||2- 8" Eminence woofers and 4" Celestion midranges|
|Sensitivity||93dB - 2.83V/1m|
|Nominal Impedance||8 Ohm|
|Frequency Response||75hz - 20khz (sealed) 35hz - 20khz (ported)|
|Recommended Power||10 - 500 watts|
|Enclosure Type||Sealed or Ported|
|Measurements||10.25" x 28" x 12" deep (sealed) Ported tower speaker dimensions coming soon. No flat pack for this will be offered.|
This kit comes with the baffle so you can easily make your own enclosure around it.
You may also be interested in the following product(s)