This is a new product and I am willing to help get the front panel size you need, even if it's not one of the listed options. Once some of these have been built and I know the enclosure size most people want, I'll work on getting a couple different flat pack sizes cut. In the meantime, let me know what dimensions will work best for you. Below are a couple different enclosure sizes you can build using the front panel of your choice. More information on this monster woofer can be found at this link.
Larger midbass module: 50 liters (1.75 - 2.25 cuft) tuned around 40hz. This is a good all around size to dig fairly deep and give a lot of output.
Smaller midbass module: 45 liters (1.55 cuft) tuned to 45hz will give an F3 of 45hz and an F6 of 39hz. This gives very similar output to the first one.
Deep Extension: 70 liters (2.25 cuft) tuned 36hz will give an F3 of 35hz and an F6 of 31hz. This would be good for the bottom of a 3-way full range speaker such as the Maximus-12.
These all have a lot of output and dynamics above 38hz. Their sensitivity is 3-6db higher than a normal subwoofer along with an impedance peak in the upper bass region which leads to virtually no thermal compression.
|Model||MBM-12 Midbass Module|
|Nominal Impedance||8 ohm|
|Frequency Response||35hz - 300hz|
|Recommended Power||200 - 1000 watts|
There will be more information coming on this build.
You may also be interested in the following product(s)