Shopping cart: Now in your cart 0 Item(s) $0.00

You're currently on:

4 cuft Stereo Integrity HT-18

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

4 cuft Stereo Integrity HT-18

Email to a Friend

Availability: In stock.

Add Items to Cart

Quick Overview

Subwoofer flat pack

Product Description

Update:  September 10, 2017 -  These flat packs are made specifically for the new Stereo Integrity HT-18 V2 subwoofer.  The more expensive HST-18 has a thick rubber gasket around it's outer flange and will not fit this enclosure. 


These are made from 18mm (3/4") CARB 2 compliant Baltic birch plywood with a double thick 1.5" front baffle.  I will try to get more pictures posted soon.  It has recessed cut outs for the Stereo Integrity HT-18 V2 subwoofer, rabbet joints for the top, bottom, sides and back panels, 1/2" roundovers on the front baffle, and also six full depth braces that fit into dado grooves! All panels fit together very nice and make it nearly fool proof.  

NOTE: I did not have the CNC company cut holes for terminals because everyone likes using something different.  Most people that have purchased this flat pack bought the binding posts shown here:  click link  

Additional Information

Model 4 cu ft Stereo Integrity flat pack
Designer's Name Erich H
Woofer N/A
Tweeter N/A
Sensitivity N/A
Nominal Impedance N/A
Frequency Response N/A
Crossover Point N/A
Recommended Power N/A
Enclosure Type Sealed
  • 19.5"w x 22"h x 21.5" deep
  • 4 cu ft net after double baffle and bracing
  • Woofer recess: .5"
  • 52 lbs
  • Included Parts
  • 1 - flat pack made from 18mm (3/4") Baltic birch plywood
  • Shipping Weight 54lbs
    Speaker Notes

    This is a a very easy cabinet to assemble and can be done without clamps if needed. Some people have put these together using masking tape to hold the panels while the wood glue dries.

    You may also be interested in the following product(s)

    Threaded Binding Posts BNDG-03

    Threaded Binding Posts BNDG-03

    Product Tags

    Add Your Tags:
    Use spaces to separate tags. Use single quotes (') for phrases.