You have no items to compare.
Welcome to DIY Sound Group
Details
These Denovo binding posts look great on small and mid sized speaker cabinets, but they can be used on larger speakers too. Each set comes with small red and black plastic caps inserted in the ends that can be removed if you use short banana plugs.
NOTE: You need to order one set for each speaker. If you are getting two speakers, you need to order two sets of binding posts.
Product Highlights:
- 1.75" total length. After installation they are .5" long on the outside of your cabinet.
- The red and black inserts will properly mark speaker polarity on one speaker.
- Gold plated to resist corrosion.
- Great for boxes that have wood panels up to 3/4" thick.
- Easy installation
Note: These ship for free with any speaker kit or flat pack purchase.
-
Great binding posts, why didn't I choose these sooner? review by Hoodcom on 2/8/2018(Posted on 12/8/15 from the old site)
Basically when I bought the new ported cabinets for the Volt-10 series from here, and assembled everything, I wanted my terminals centered on the bottom of the enclosure, but the bracing runs along there. Which made a good excuse to give binding posts a try, and I liked what was offered here.
As soon as I got them in the mail, I immediately was impressed before I got to even install them. So I couldn't wait to get that done as soon as I get home which went well.
I kind of wish I would have gone this route sooner. :) -
Nice. Note orientation and spacing if you care. review by Gregg I on 2/8/2018
(Posted on 10/30/14 from the old site)
These are very nice. Space 3/4" O.C. for dual banana plugs (yes, those are still out there some places), and note the direction of the thru-wire holes when you put them in, if you want them oriented the same way. Don't expect to spin them once they are in. -
Everything you need and expect. review by Neil D on 2/8/2018
(Posted on 7/9/14 from the old site)
These are perfect with the Anarchy Exodus a Tapped a Horns I purchased.
Write Your Own Review
Image not uploaded yet
Installation Notes:
Easy to install by drilling two 7/32" holes into your speaker box. Unscrew the outside gold housing and tap into place. You might want to put something over the mounting base before tapping it in so you don't mess up the finish with the hammer.
