You have no items to compare.
Welcome to DIY Sound Group
A smaller Anarchy: One of the engineers that worked on the 7" Anarchy also worked on a smaller version a few years ago. When I found out about this I asked if they could make a few different samples. The final design is a 5.5" Anarchy woofer that can cross as high as 3000hz, but also stays true to form with an incredible 9mm X-max.
Product Highlights:
I always wanted a set but they been out of production for awhile. Managed to score two of these and they are very impressive. Have mines playing at 50hz to 3khz -24db filters off ran active off an apline pdx 5 with hybrid audio l1v2 tweeters. Door are dampened with approx 3 sheets of DD audio and 1.5 sheets of second skin damplifier pro.
Quick vid off my youtube channel:
https://www.youtube.com/watch?time_continue=11&v=LeQRPgVkPe8
Image not uploaded yet
General Information Anarchy 554 Woofer |
Rated RMS Power: | 70 Watts |
Rated Max Power: | 140 Watts |
Impedance: | 4 Ohm |
Sensitivity: | db 1w/1m |
Frequency Response: | 40hz -3750hz |
Magnet: | Ferrite |
Overall Diamater: | mm |
Cutout Diameter | mm |
Mounting Depth | mm |
Weight: |
Re: | |
Le: | mH |
Impedance: | 4 Ohm |
Fs: | Hz |
Qts: | |
Qes: | |
Qms | |
Vas: | |
Bl: | |
Sd: | cm^2 |
Xmax: | 9mm |
>
I will be putting up some recommended enclosure sizes and tuning frequencies soon.
Frequently Asked Questions:
* What size cutout does this woofer need? Answer: Mounting diameter is 5", outer flange is 6".
* How much power can these take? Answer: Power handling depends on the enclosure it's installed in and the frequencies the woofer is being fed.